Repelicone
L

General purpose water repellent impregnation based on solvent borne Silane/Siloxane

Advantages

Deep penetration into substrate.
Very good reduction of water and chloride intrusion.
Excellent resistance to alkalis and UV light.
Absorbed by the substrate, does not form film and hence does not change or stain the substrate.
Increases considerably freeze thaw resistance.
Minimizes efflorescence.
Breathable, allows for water vapour release.
Very good resistance to dust and dirt pick-up.

Description

Repelicone L is a ready for use, general purpose single component solvent based silane/siloxane water repellent impregnation for application on vertical or steeply sloping concrete, mineral-based natural and artificial stone, cementitious substrates, mineral plasters and mineral paints.

Packaging

Repelicone L is available in 20 litre pails and 200 litre drums.

Coverage

0.1 - 0.4 litre/m² depends on the porosity of the substrate.

Storage

Repelicone L should be stored under cover at a minimum ambient temperature of 5°C.

Shelf Life

Repelicone L has a shelf life of 12 months from date of manufacture if stored in proper conditions and sealed drums.

Standards

Repelicone L complies with the requirements of EN 1504-2 Surface Protection Systems for Hydrophobic Impregnation (H) Principles 1.1, 2.1 and 8.1.

Applications

Repelicone L provides very good water repellency and protection from weathering to vertical or steeply sloping concrete, mineral-based natural and artificial stone, cementitious substrates, and mineral paints.
Repelicone L can also be used for injection into walls to prevent rising damp.
Repelicone L can be used as a moisture barrier and primer for exterior paints.