![](/sites/default/files/styles/width_1000/public/products/main/Keyfix%20VE30.jpg?itok=NKJJU6bj)
Keyfix VE30
Vinylester styrene free resin anchoring system
Keyfix VE30 is high strength, fast cure, styrene free, vinylester resin anchoring grout supplied in a pre-packed cartridge system.
It is suitable for use with different type of substrates such as uncracked concrete, solid and hollow masonry, hard natural stone, solid rock, voided stone or rock.
![](/sites/default/files/styles/width_1000/public/products/main/Keyfix%20VE30.jpg?itok=NKJJU6bj)
Downloads
Keyfix VE30_TDS_0.pdf
TDS
- Suitable for dry, wet and flooded holes.
- Use standard sealant application gun.
- Exceptional rapid strength development.
- Styrene free.
- Exceptional bond to concrete and steel surfaces.
- High ultimate and early strengths
- Low waste, reusable and easily recycled cartridge.
Keyfix VE30 is ideally designed for use in the following applications:
- Anchoring threaded rods and post installed rebars in masonry and uncracked concrete.
- Permanent installation of reinforcing and starter bars.
- Suspended ventilation systems.
- Safety barriers.
- Machinery and heavy machinery.
- Racking.
- Rolling cranes.
Keyfix VE30 is available in 300 ml single-piston foil pack cartridges.
Keyfix VE30 has a shelf life of 12 months when stored in their original packaging, the correct way up, in cool conditions (5°C to 25°C) out of direct sunlight
Keyfix VE30 complies with the following standards:
- ETA according to EAD 330499-00-0601 (Option 7: Uncracked Concrete).
- ETA according to EAD 330076-00-0604 (Masonry).
- ETA according to EAD 330087-00-0601 (TR023: Rebar Connections).