Proplast CM100
Machine applied exterior grade cementitious levelling plaster with improved bond strength, high impact and condensate resistance (Formerly known as Aylaplast 100)
Proplast CM100 is a polymer modified, ready mixed cementitious plaster applied by hand or machine. Proplast CM100 is composed of a blend of cement, sand, limestone, dry powder aggregates, selected polymers and fibres which when mixed with water produces a thixotropic mortar suitable for plastering on vertical and overhead surfaces.
Downloads
Proplast CM100_TDS_0.pdf
TDS
Proplast CM100_MSDS_3.pdf
SDS
Proplast CM100_MS_1.pdf
MS
- Can be applied either by trowel or spray plastering machine.
- Shrinkage controlled polymer modified cementitious plaster.
- Improved bond strength.
- High impact resistance.
- High condensate resistance.
- Easy to apply, one component, requires only addition of water.
- Thixotropic properties allowing extra high build, for use in vertical and overhead applications.
- Suitable for internal and external applications.
- Suitable for wet and dry areas.
Plastering of concrete and blocks surfaces internally and externally.
Proplast CM100 is available in 25 and 50 kg bags.
Proplast CM100 has a shelf life of 12 months from date of manufacture if stored at temperatures between 2°C and 50°C in original unopened bags.
Approximately 15 - 16 litres/25 kg bag.
Proplast CM100 complies with ASTM C150, Type 1, ASTM C897 and application standard ASTM C926.
