Flo-Grout
2

General purpose non-shrink cementitious grout
 
Advantages
  • Good non-shrinkage characteristics.
  • Extremely dense and low permeability.
  • High early strength development allowing for rapid installation.
  • High flow can be poured or pumped into variable gap widths down to 10 mm.
  • Easy to apply, single component which require only addition of water.
Description

Flo-Grout 2 is pre-mixed, pre-packed chloride free cementitious grout. It contains cement, selected additives, well graded, and non-reactive aggregates and is designed to give excellent flow properties, shrinkage compensation, frost resistance, and high compressive
strength.

Packaging

Flo-Grout 2 is available in 25 kg bags.

Thicknesses and Size Limitations

Flo-Grout 2 can be applied in a single layer at thickness between 10 - 100 mm. For greater thickness, an 8 - 12 mm washed aggregate should be added at a ratio of 14 - 15 kg of washed aggregate to 25 kg of Flo-Grout 2.

However, Flo-Grout 2WWA are available in 25 kg bags, where the mixing water is about 2.9 litre/bag to get a flowable consistency.

Yield

Approximately 12.5 - 13 litre/25 kg bag depending on consistency.

Shelf Life

Flo-Grout 2 has a shelf life of 12 months from date of manufacture if stored at temperatures between 2°C and 50°C.

Standards

  • Flo-Grout 2 complies with ASTM C1107, Grade A.

Applications

Flo-Grout 2 is ideally designed for use in the following applications:

  • Machine beds.
  • Stanchion bases, struts, railings, and guardrail assemblies.
  • Filling of shutter tie rod openings.
  • Anchoring of tie bars, and bolts.
  • Pile top re-profiling.


Download file




Connect with Don Construction Products


  Complaints Record Form

  Customer Satisfaction

Name *
Email *
Phone
Address
Subject
Request  
Security Code *

Don Construction Products - Qatar

Headquarters
Click to find on map
New Industrial Area, Street 21, Zone 81, bldg. # 9
P.O Box 24839 
Doha - Qatar
Tel.: +974 4 411 4004
Fax: +974 4 411 4014

E-mail: info.qatar@dcp-int.com