Acetoxy cure silicone sealants
Tools and Equipment
Joint Preparation
- The joint surfaces must be clean, dry and free from all contamination
- It is recommended to use masking tape on each side of the joint to maintain clean and uniform joint sides.
- Where applicable, appropriate joint filler e.g. closed cell polyethylene foam, should be used to provide the correct joint depth
![](/sites/default/files/styles/width_1000/public/pages/Flexseal%20%20Range%20Steps1.jpg?itok=K8pirm4z)
![](/sites/default/files/styles/width_1000/public/pages/Flexseal%20%20Range%20Steps2.jpg?itok=iHf4iOBZ)
Application
- Apply the sealant into the joint starting from the bottom, ensure that the joint is completely filled
- Tool the surface of the sealant within 15 minutes of the application using a spatula
- Remove the masking tape directly after tooling the sealant
*Check our range of sealants ( Click here)
*Calculate your quantities using DCP Sealants Calculator
![](/sites/default/files/styles/width_1500/public/pages/pexels-max-vakhtbovych-6980656.jpg?itok=r4eOy110)